Skystars 20x20mm F405 Mini HD2 Flight Controller and 35A 3-6S ESC Stack with Barometer for Betaflight and INAV FPV Racing
|Model||F405 Mini HD2 Flight Controller|
|Item Weight||0.03 Pounds|
|Are batteries included||No|
- Solder pads are the largest in size compared to other FC in market.Proper solder pad spacing to avoid solder bridge and facilitate easy soldering.ESC connector on top-side rather than bottom which makes it easy for repair.
- Hybrid design allows both M3 and M2 screw.TVS Diode for Reverse Polarity Protection and Voltage Spike Suppression. Powerful BEC to supply all your electronics.
- Pads arrangement are executed in such a way that when you twist the wires of the camera VTX and RX you don’t get any wire overlapping this gives you a uniform twist and clean look.
- For DJI connector on the bottom side. Budget-friendly price ( We understand the situation of chip shortage and rising prices of FC )
- Two stages of Quality check to reduce any faulty electronic.No power lines near Gyro to avoid any EMI interference. Comes ready with I2C support and INAV.
Item name: F405HD2 Mini Betaflight Flight Controller
Input voltage: 3-6S LiPo(11.1V~22.2V)
OSD: Betaflight OSD &DJI HD OSD (UART6)
6 hardware UARTS (UART1,2,3,4,5,6,)
Buzzer Pad: YES
CURR Pad: YES
BEC 5V 2A & 10V 2A(Max 3A)
Firmware: Betaflight /INAV SKYSTARS F405HD
Mounting Holes: 20mm/M2 or M3
Item name: KM35 35A 4IN1 ESC
Input voltage: 3-6S LiPo
Peak Current:45A≥ 10S
Support : Dshot 300/600
Mounting holes : 20X20 mm/M3
Product size: 31*36*3.9mm
1x F405HD2 Mini Betaflight Flight Controller
1x Skystars Kramam 35A 3-6S 20×20 4in1 ESC